Lumasense-technologies LumaSoft Gas Multi Point 7860 Manual de usuario descargar pdf (Pagina 46)

Chapter 3

_________________________________________________________________________

________________________________________________________________________

BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S

7810 and 7860 Page 46 of 194

Then select the gas for which the alarm should be configured in the Gas

selection box, see Figure 3.28.

Figure 3.28 Select for which gas the alarm should be configured

There are four different alarms which can be configured: Low, Low Low,

High and High High. The Low alarm can be set to give a warning that

the concentration of the gas is dropping below the normal level. The

Low Low alarm can then be configured to give a warning whenever the

gas concentration drops below the lowest allowable concentration. The

High and the High High alarm levels are set to give a warning for a

concentration above a certain limit and that the maximum allowable

concentration is exceeded.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 193 194

Sin comentarios

Lumasense-technologies LumaSoft Gas Multi Point 7860 Manual de usuario Pagina 46