Lumasense-technologies M330 Manual de usuario descargar pdf (Pagina 14)

M330 Manual Installation  14

5. As the cavity flange approaches the furnace tube, very gently continue insertion until

the cavity stops moving. It is now touching the control thermocouple, so do not force

more movement.

6. Final spacing between the cavity collar and the furnace tube should be about 1/8”

(3 mm).

7. Replace the front panel being careful not to allow it to strike the cavity collar or cavity

assembly.

Note: Some cracking on the cavity collar is normal. If the M330 is to be moved, remove

cavity prior to moving.

3 mm

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 44 45

Sin comentarios

Lumasense-technologies M330 Manual de usuario Pagina 14