
M390 Manual Introduction 10
2.2 Technical Data
This
Model
Model Part No. Exit Aperture Temperature Range Power
[ ] M390-A1 14029-A1 0.625 in 600-2300 °C 15KVA
[ ] M390-A2 14029-A2 1 in 600-2300 °C 15KVA
[ ] M390-B1 14029-B1 0.625 in 600-2600 °C 15KVA
[ ] M390-B2 14029-B2 1 in 600-2600 °C 15KVA
[ ] M390-C1 14029-C1 0.625 in 600-3000 °C 15KVA
[ ] M390-C2 14029-C2 1 in 600-3000 °C 24KVA
[ ] M390-L1 14029-L1 1 in 300-2000 °C 15KVA
±0.25% of reading ±1 C
Closed end graphite tube 150
heated length
(effective from 0.6 to 1.8 µm)
Water cooled. Standard hose c
onnection on rear, 3 lpm (1 gpm)
Customer is responsible to provide pressure safety valves at inlet
and outlet. Outlet (drain) must not be blocked.
Argon High Purity (99.99 % pure)
Purge Gas Inlet Pressure:
Customer is responsible to
pressure safety valves at inlet
Graphite tube with argon gas purge, 80 lph (4
Mikron M668L (or M680 for M390L1)
communication output (RS485 optional)
minutes from ambient to 2300 °C
0 C to 44 C (32 F to 110 F)
Humidity:
[ ] 208 or [ ] 220 or [ ] 240 VAC
[ ] 15 kVA [ ] 24 kVA
[ ] 15kVA Must use plug that complies with IEC-309 at 75 Amps at 220VAC
[ ] 24kVA Must use plug that complies with IEC-309 at125 Amps at 220VAC
Comentarios a estos manuales