Lumasense-technologies ISQ 5-LO Manual de usuario descargar pdf (Pagina 27)

IMPAC pyrometers ISQ 5 · ISQ 5-LO

This is followed, if necessary for that command, by the ASCII parameter “X”. If this parameter “X” is omitted,

then the device resets with the current parameter.

A “?” after the small command letters answers with the respective settings (only at setting commands, not at

enquiry commands).

 stand for product of emissivity, surface coverage and transmission of the measuring distance

Example: Entry: “00em“ + CR

The emissivity setting (

) of the device with the address 00 is returned

Answer: “0970“ + CR means Emissivity = 0.97 or 97.0%

Description Command Parameters



/ 

write

read

AAevXXXX

AAvr

XXXX=0800..1250 

/ 

=0.800..1.250

Answer: DDDD 4 decimal digits 0800..1250

 for one-channel

temperature

AAemXXXX

AAem

XXXX=0050..1000 =0.050...1.000

Answer: DDDD 4 decimal digits 0050...1000

Response time AAezX X=0..6 0=0.00s 1=0.01s 2=0.05s 3=0.25s

4=1.00s 5=3.00s 6=9.99s

Clear peak memory AAlzX X=0..8 0= OFF 1=0.01s 2=0.05s 3=0.25s

4=1.0s 5=5.0s 6=25.0s 7=EXTERN 8=AUTO

External clearance AAlx

Analog output AAasX X=0 (0…20mA) X=1 (4…20mA)

Laser / One-channel

mode

AAlaX

AAla

X=0 off X=1 on

Answer: 1 digit 0 / 1

Measuring value

(ratio temperature)

AAms Answer: QQQQQ (88880=Overflow)

5 decimal digit (in °C, last digit is 1/10 °C)

Measuring value

(one-channel and

ratio temperature)

AAek Answer: SSSSSQQQQQ

2x5 decimal digits (in °C, last digit is 1/10°C), one-channel temperature with

emissivity

 (read)

AAtr Answer: DDDD 4 decimal digit 0000..1500

Minimum intensity

(minimal allowed )

AAawXX

AAar

XX=02…50 (0.020..0.500)

Answer: DD 2 decimal digit 02..05

Basic range (read) AAmb Answer: XXXXYYYY 2x4 hex-digit for lower and upper range limit (°C)

Sub range (read) AAme Answer: XXXXYYYY 2x4 hex-digit for lower and upper range limit (°C)

Sub range (set) 1.

AAm1XXXXYYYY

AAm2

XXXXYYYY=2x4 hex-digit for lower and upper range limit (°C)

AAm2 confirms the change (autoreset)

internal temperature

(read)

AAgt

AAtm

Answer: DD 2 decimal digits (00..98 °C)

gt=current temp. tm=maximum temp. (memory)

Baud rate (set) AAbrX X=0..5 0=1200 Bd ... 5=38.4 kBd (autoreset)

Device address (set) AAgaXX XX=00...97 (autoreset)

Read parameters AApa Answer: 15 decimal digits

DD............. : Emissivity (see em)

..D............ : Response time (see ez)

...D........... : Clear peak memory (see lz)

....D.......... : Analog output (see as)

.....DD........ : Internal temperature (see gt)

.......DD...... : Device address (see ga)

.........4..... : Baud rate (see br )

..........0.... : always 0

...........DDDD : Ratio correction (see vr)

Device type /

software version

AAve Answer: VVMMJJ VV=54

MM=Month JJ=Year of software version

Extended data protocol for video module

Reading video-status: AAos Output: XX hexadecimal-Byte

(bits 6, 5 and 3 unassigned)

Bit 7 = 1 no watch/date implemented

Bit 4 = 1 date/watch had a low voltage error

Bit 2 = 1 date is indicated

Bit 1 = 1 watch is indicated

Bit 0 = 1 user text

= 0 device number is indicated

User-text: AAox

AAox_

AAoxTT…TT

Output: "XXXXXXXXXXXX" ASCII-symbol with "" limited

_ = space character  deletes bit 0 in video-status (auto reset!)

TT...TT user text with max. 12 ASCII, sets bit 0 in video-status (auto

reset!)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Comentarios a estos manuales

Sin comentarios

Lumasense-technologies ISQ 5-LO Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Lumasense-technologies ISQ 5-LO