Lumasense-technologies ISR 50-LO Manual de usuario descargar pdf (Pagina 53)

INFRATHERM pyrometer ISR 50-LO

Digit 10 (0 ... 6 or 8): Baud rate

Digit 11 (0): Always 0

Digit 12 … 15: Emissivity slope

Device type: AAna Output: “ISR 50-LO“ (16 ASCII-characters)

Serial number: AAsn Output: XXXX (hex 4-digit)

Ref. number: AAbn Output: XXXXXX (hex 6-digit)

Device type /

software version:

AAve Output: XXYYZZ (6-digit decimal)

XX = 54 for ISR 50-LO

YY = Month of software version

ZZ = Year of software version

Software version

in detail:

AAvs tt.mm.yy XX.YY

tt = day; mm = month; yy = year; XX.YY = software version

Note: the letter “l” means the lower case letter of “L”.

Additional instruction for the RS 485 interface:

Requirements to the master system during half-duplex operation:

1. After an inquiry, the bus should be switched into a transmission time of 3 bits

(some older interfaces are not fast enough for this).

2. The pyrometer's response will follow after 3 ms at latest.

3. If there is no response, there is a parity or syntax error and the inquiry has to be repeated.

15 Reference numbers

15.1 Reference numbers instruments

3 882 900

ISR 50-LO MB 18: 700 ... 1800°C

3 882 910 ISR 50-LO MB 25: 800 ... 2500°C

3 882 920 ISR 50-LO MB 30: 1000 ... 3000°C

Scope of delivery: Converter ISR 50-LO with HD fibre, length: 2,5 m (other length 5 m, 6 m, 10 m or 15 m

possible for extra charge) and optical head, works certificate, PC software „InfraWin“, user manual.

Ordering note:

When ordering the following data are necessary:

• the measuring distance the optical head has to be adjusted

• the length of the fibre in case of another length as the standard of 2.5 m

A connection cable is not included in scope of delivery.

15.2 Reference numbers accessories

3 821 440 Connection cable 5 m, 11 wires, with additional digital cable (1 m)

3 821 450 Connection cable 5 m, 4 wires (for power supply and analog output)

3 834 390 ball and socket mounting for optical head

3 834 230 adjustable mounting support for optical head

3 835 180 air purge for optical head

3 835 240 90° mirror for optical head

3 852 290 Power supply NG DC for DIN rail mounting; 100 … 240 V AC ⇒ 24 V DC, 1 A

3 852 540 power supply NG 0D for DIN rail mounting; 85 ... 265 V AC ⇒ 24 V DC, 600 mA

3 852 550 power supply NG 2D, as NG 0D: additionally with 2 limit switches

3 890 640 LED digital display DA 4000-N

3 890 650 LED digital display DA 4000: with 2 limit switches

3 890 560 LED digital display DA 6000-N: with possibility for pyrometer parameter settings for digital

INFRATHERM pyrometers; RS232 interface

3 890 570 LED digital display DA 6000-N with RS485 interface

3 890 520 LED digital display DA 6000; DA 6000-N additional with 2 limit switches and analog input

and output

3 890 530 LED digital display DA 6000 with RS485 interface

3 826 500 HT 6000, portable battery driven indicator and instrument for pyrometer parameter setting

1 2 ... 48 49 50 51 52 53 54 55 56

Comentarios a estos manuales

Sin comentarios

Lumasense-technologies ISR 50-LO Manual de usuario Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Lumasense-technologies ISR 50-LO