Lumasense-technologies ISR 12-LO/GS Manual de usuario descargar pdf (Pagina 21)

IMPAC pyrometers ISR 12-LO/GS

9.6 Number of devices

With a click on “Number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices

are selected, always 2 windows are displayed for settings or evaluation.

9.7 Basic settings

Under pyrometer parameters all preset values

can be displayed and modified if necessary. If the

window pyrometer parameters displayed, chang-

ing of settings on the pyrometer is blocked.

The window pyrometer parameter contains all parameter

settings described in section 8, Parame

ters.

Notes:

• “Basic range” displays the total range of the pyrometer

automatically and cannot be changed. If the sub range

is changed, confirm it with the small OK button which

appears.

• Under “Material “ you have the possibility to store the

names of different measuring objects with their emis-

sivity values and to recall them from the list.

• A click on the laser targeting light icon (

) turns the

laser targeting light on or off at this point. After approx.

two minutes the laser targeting light is switched off

automatically.

The open / save button enable to store and recall own pyrometer configurations.

“1 meas.” shows the last pouring stream temperature in the pyrometer parameters window for

approx. 1 second.

If the pyrometer is used in another mode than pouring stream, „1 meas.“ shows the current

measuring temperature for approx. 1 second.

In this window the pouring stream mode can

be switched on and off (standard setting at the

ISR 12-LO/GS is “on”).

Descriptions to the parameters are to find un-

der 8.1 pouring stream mode).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Sin comentarios

Lumasense-technologies ISR 12-LO/GS Manual de usuario Pagina 21